ATENA 130

ATENA 130 Single depth Telescopic fork – Load up to 2.000 Kg (4400 Lb)

Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team.

Being fit for special applications, the ATENA 130 allows handling heavy loads with long strokes and small bending. Also the ATENA 130  has the possibility to be installed upside down, for special purposes. Not suitable for high operating speeds and accelerations, it works at its best in all those sectors where toughness, repeatability and fatigue stress are required. As for the transmission, it’s available both with racks and pinions and with chains.

The ATENA series can be produced also in notably bigger sizes, nevertheless, it’s part of the custom-built production and its feasibility has to be established along with LHD S.p.A.’s technical staff.

All LHD Group’s telescopic forks undergo accurate run tests and quality checks before delivery.

Description

ATENA 130 Telescopic fork
Single depth – Load up to 2000 Kg (4400 Lb)

  • Standard length: from 1200 mm to 3600 mm
  • Stroke: from 1300 to 3750 mm
  • Load: up to 2.000 kg (4400 Lb)
  • Cross Section:  W x H = 200 x 130 mm
  • Speed with load: 30 [m/min]
  • Acceleration with load: 0,5 [m/s2]
  • 2 (two versions): gear and rack version and chain version

ATENA 130 model can be supplied with following combination:

  • Eccentric lift unit
  • Telescopic forks with variable axis (with only one or with both telescopic forks)
  • LHD Transfer

 

  • Automotive
  • Wood industry
  • Coil handling (paper, steel)
  • Stacker crane AS/RS
  • AGV / RGV / LGV
  • Upside down
  • Combined for long product (steel bars)
  • Cantilever
  • Cold storage (down to -30º special treatment and materials)